|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|
EpoxySystems' Product #226 Fast Setting Water Based Epoxy
DESCRIPTION EPOXYSYSTEMS’ PRODUCT #226 Fast Setting Water Based Epoxy Coating is a two component, 100% reactive, water based, multi functional epoxy resin coating. EPOXYSYSTEMS’ PRODUCT #226 is manufactured to produce the utmost in performance in a safe, water borne coating. EPOXYSYSTEMS’ PRODUCT #226 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. ADVANTAGES WHERE TO USE EPOXYSYSTEMS’ PRODUCT #226 can be used as a coating for steel, concrete, wood, or plastics. EPOXYSYSTEMS’ PRODUCT #226 can be used where highly durable, fast setting coatings are a must such as: marine environments, chemical and industrial plants, power plants, food processing areas, bridge pier caps and concrete floors. EPOXYSYSTEMS’ PRODUCT #226 is available in a variety of colors. EPOXYSYSTEMS’ PRODUCT #226 is a pigmented coating that can be applied to concrete as early as three days after placement. The standard colors of EPOXYSYSTEMS’ PRODUCT #226 are white, beige, and gray. Other colors are available as special order products. Normal water-reducible tint concentrates can be used to color EPOXYSYSTEMS’ PRODUCT #226
CONCRETE SURFACE - Concrete surfaces shall be cleaned to remove dirt, curing compounds, existing coatings or laitance to provide a clean, sound, bonding surface. Cleaning may be accomplished with EpoxySystems’ -Masonry Cleaner or water blasting, acid etching, sandblasting, or other methods that would achieve a similar result.
MIXING Stir Component "B" thoroughly before mixing. Combine 2 parts by volume of "A" with 1 part by volume of "B" (mixing ratio 2:1). Mix for not less than 3 minutes with a slow speed drill (300 to 600 rpm), and an EpoxySystems’-Mixing Paddle. When mixing has been completed, apply immediately. Clean equipment with soap and water.
POT LIFE EPOXYSYSTEMS’ PRODUCT #226 has a pot life at 75°F (24°C) of approximately 90 minutes. It is essential to use the material within 90 minutes even though the viscosity of EPOXYSYSTEMS’ PRODUCT #226 does not increase greatly over time.
APPLICATION EPOXYSYSTEMS’ PRODUCT #226 Fast Setting Water Based Epoxy Coating may be applied by brush, roller or spray. All spray equipment must employ traps to prevent water and oil from contaminating coating. The substrate temperature should not be below 10°C and the relative humidity not above 80%.
COVERAGE EPOXYSYSTEMS’ PRODUCT #226 will cover approximately 250 sq. ft./gal/coat depending upon surface texture. For best results, use two (2) coats.
STORAGE It is important to protect EPOXYSYSTEMS’ PRODUCT #226 from frost; therefore store it under frost proof conditions. At temperatures up to 75°F (24°C), the storage stability of EPOXYSYSTEMS’ PRODUCT #226 packed in original containers amounts to at least 12 months. As a result of the high solids content of EPOXYSYSTEMS’ PRODUCT #226
and the solid resin character of the polymer, EPOXYSYSTEMS’ PRODUCT #226
tends to form a tiny skin upon foaming and temperature changes during storage.
Therefore filtration of the product (without heating) before being applied by
the end-user is recommended.
CAUTION Contains Epoxy Resin and Amines Hardener. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling. FIRST AID: In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before re-use. The rules and regulations established by local authorities should be observed when handling and processing epoxy resins and hardeners
FOR INDUSTRIAL USE ONLY KEEP AWAY FROM CHILDREN
| ||||||||||||||||||||||
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][Online-
Ordering Authorization Form]
|
