Coating Installation GuideCoatings CalculatorSolvented CoatingsWater Based Epoxy CoatingsPolyurea_Coatings100% Solid Epoxy CoatingsAcrylic CoatingsSee alsoSolvented CoatingsProduct #215LVOC- a high solids epoxy, chemical curing, quick- drying resin system. Product #215 produces a ceramic like coating on masonry, concrete plaster, cement, asbestos board, wood, fiberglass, metal and most other rigid materials. Formulated for applications that require superior adhesion and durability, chemical resistance, corrosive protection, quick cure and easy cleaning. Product #674 Electrostatic Dissipating Urethane Topcoat Water Based Epoxy CoatingsProduct #222 Water Based Epoxy - Epoxy Systems’ Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Product #222 is manufactured to produce the utmost in performance in a safe, water borne coating. Product #222 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. Product #675 Electrostatic Dissipating Water Borne Epoxy Topcoat-a pigmented, water emulsion epoxy electro-static dissipative finish designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. It has very low odor and can be used in occupied areas as a finish sealer in Thin-Film Electro-Static Dissipative Coating Systems. Polyurea CoatingsEpoxySystems’ PRODUCT #312 Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, PRODUCT #312 is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate. Product #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities. 100% Solid Epoxy CoatingsProduct #1 All Purpose Coating - a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc Available in normal, fast, and Cold Temperature Cure versions. Product #1Fast - Shorter Potlife, and faster setting version of Product #1 Product #1Cold Temperature Cure - This is a version of Product #1 that sets even faster than Product#1 Fast. Typically used in colder temperatures, or where an very fast cure is required. Product #1W a two component, 100% solids epoxy Hi-Build epoxy coating used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, tanks, etc. Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure. Product #2 Fast - Shorter Potlife, and faster setting version of Product #2 Product #2 Cold Temperature Cure - This is a version of that sets even faster than Product#2 Fast. Typically used in colder temperatures, or where an very fast cure is required. Product #2W a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Product #204 Cold Temperature Cure Polymeric Coating - is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Product #210 Coal Tar Epoxy is a two component, 100% Solids coating especially formulated for high build applications. It produces a tough, flexible, chemical and impact resistant film. It is formulated to be easily spray applied as thick as 40 mils in 1 coat. It provides excellent resistance to aggressive water, acids, and caustics. Suitable for intermittent exposure to 300 degrees F. Product #214 Tabletop Resin - an all-purpose, low viscosity Epoxy System for coating wooden counter tops, tabletops, bar tops and similar applications. It forms a glossy, hard surface, which is resistant to stains. It has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas Product #220 Rebar Touch Up Epoxy Coating is a two component, 70% solids epoxy coating specially manufactured to touch up damage epoxy coated rebar or to coat rebars not previously protected against corrosion. Product #226Fast Setting Water Based Epoxy is a Fast Setting Water Based Epoxy Coating is a two component, 100% reactive, water based, multi functional epoxy resin coating. PRODUCT #226 is manufactured to produce the utmost in performance in a safe, water borne coating. PRODUCT #226 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. Product #226 is VOC Compliant, Fast Curing, and tintable with standard colorants. It is Internally Flexibilized so it can be applied to metals and plastics. It is water-reducible and easily applied. Product #250 Water Tank Type Coating is a 100% solids, moisture- insensitive epoxy coating, containing no solvents. It is mixed at a 2:1 ratio, produces a tough, chemical and abrasion-resistant coating for dry or damp concrete, wood or steel surfaces. Product #255 Mastic High Build Epoxy Coating is a 100% solids, moisture-insensitive, epoxy resin system. When mixed at a 1:1 ratio, by volume, it produces an excellent coating for dry or damp concrete, wood or steel surfaces. It iss used on piles, piers, and concrete or steel tanks where concrete or steel needs to be protected from abrasive environments. Product #600 Flexible Novolac Product #630 Novolac Coating/Mortar Binder Product #632 Novolac Control Joint Filler is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade. Product #633 Novolac Coating Product #634 Novolac High Temperature Epoxy Product #635 Novolac Coating/Mortar Binder Product #636 High Temp Chemical Resistant Primer/Topcoat - a 100% solids amine cured epoxy Novolac that is solvent free. Specifically designed as a Methanol resistant coating. Product #635 is well suited for use in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac it is suitable for hand or spray application. Product #637 High Temp Coating/Primer Product #638 Glass Filled Novolac Product #640 Chemical & Heat Resistance Product #641 High Temp Epoxy is a moisture-insensitive, two-component, 100% solids epoxy coating. It is especially formulated to protect concrete, steel and wood subject to high temperatures and corrosion. Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion. Product #642 Multifunctional High Chemical Resistance Epoxy Coating/Bonder PRODUCT #643 Highly Chemical Resistant Coating is a solvent free, high functionality Novolac epoxy coating suitable for immersion and non-immersion service. Designed specifically as a Methanol resistant coating. It is well suited for protection in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on ferrous and non-ferrous metals and concrete. Product #644 High Temp Chemical Resistant Coating. Similar to 641LV, but with fillers to make it thicker. Product #645 High Temp Coating 648 Chemical Resistant Coating is a two component high performance epoxy resin formulated with a convenient 1 to 1 mix ratio. EPOXYSYSTEMS’ PRODUCT #648 Chemical Resistant Coating has been developed as a coating for exposure to organic acids and other severe chemical environments. It is used widely in the food and chemical industries for protection of concrete, wood, and steel. EPOXYSYSTEMS’ PRODUCT #648 is suitable for application by brush, roller or spray. Where in-shop production techniques may be utilized and elevated temperature curing is feasible, rapid property development may be achieved by curing at 200 - 250°F (93 - 121°C). This will provide a cured film which may be handled within a relatively short period of time (about 4 hours). Elevated temperature curing will also enhance ultimate physical and chemical resistant properties.
Product #650 Resurfacing Grade Epoxy Ceramic Filled Epoxy Coating Product #671 Conductive Primer/Sealer - EpoxySystems’ Product #671 is a low viscosity, two component, carbon filled, polyamide modified conductive primer/sealer formulated with special wetting agents to provide maximum penetration into concrete surfaces. Product #671 is ideal for both new and old concrete surfaces. Product #671 provides excellent resistance to wear, and can be used either alone or as a conductive sealer or as a conductive primer when used with EpoxySystems’ product #674 Electro-Static Dissipating Urethane Topcoat and EpoxySystems’ Conductive Systems. Acrylic CoatingsProduct #390 Flexible Acrylic Roof Coating -designed to be a highly durable, flexible roof coating with outstanding resistance to weathering, ultra-violet light and water. Withstands ponding water conditions. It is suitable for application over sprayed urethane foam insulation roofs, concrete, wood or asphalt roofs. It serves as an excellent protection for urethane foam insulated Elastomeric Coatings and MembranesEpoxy Systems, Inc. has a wide variety of elastomeric (flexible) systems for many applications. These elastomeric systems may be made from epoxy, high tech polyurethanes, or other materials. The elastomeric properties may be required for many reasons. Some of these reasons are: waterproofing, joint filling, mechanical and thermal shock absorption.
Product #401 Urethane Coating - a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. It is a superior coating that provides the ultimate in weather resistance. It offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions. Product #402 Urethane - a two component1 chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product #403 Urethane Coating Aliphatic Product #404 Fast Cure Urethane Membrane Product #405 Fast Cure Urethane Topcoat. 409 Traffic Bearing Membrane is a Resilient Traffic Bearing Membrane is a 100% solids, ambient cure impermeable elastomer. PRODUCT #409 is resistant to moisture, oils, mild acids, gasoline, and alkalies. PRODUCT #409 when applied to concrete or other surfaces, is resilient and accommodates movement in concrete substrates. PRODUCT #409 is used as a traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions. Product #410 Urethane Traffic Bearing Membrane System is a tough, resilient system with excellent elongation. It is applied as a 3-step system - consisting of a primer, traffic bearing membrane - 2 coats, and sealer. It cures at ambient temperatures and is impermeable to moisture, oils, mild adds, gasoline, and alkalies. Product #411 Primer for Product #410 Product #413 Liquid Flashing for Product #410 Product #414 Caulk for under Product #410 Product #415 Elastomeric Membrane a liquid applied, single component, moisture-cured polyurethane. It is the major component of all deck coating systems like the 450 and 450X2 systems. Composition: Liquid-applied, single-component, moisture-cured, polyurethane elastomer. All materials shall be delivered to the jobsite in unopened containers clearly marked and labeled. Product #416 Polyurethane Coating a moisture-cured, liquid applied, polyurethane, based on Aliphatic Isocyanides in combination with additives and pigments to produce a wear resistant, protective and decorative floor coating, for interior and exterior applications. It is primarily used as the protective topcoat of the 450 and 450X2 deck coating systems, but when used with the proper primer, can be used as a stand alone coating. Product #417 Elastomeric Waterproofing A black, liquid applied single-component moisture-cured polyurethane coating, designed to form a seamless, flexible rubber membrane impervious to moisture. Composition: Polyurethane elastomer. A two-component system is available, which does not depend on atmosphere moisture to cure. Type I: For horizontal surfaces. Type II: For vertical surfaces. USES: allows expansion and contraction over a broad temperature range and maintains waterproofing properties under continuous exposure to water. Type II has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. 417 remains flexible from -75°F to +175°F (-59°C to 79°C). Use as a waterproof membrane is intended for use wherever overflow water must be contained. Product #417PW for Potable Water is similar to #417 Elastomeric Waterproofing , but meets potable water standards Product #418 Elastomeric Membrane, a black, self-leveling, liquid applied, two-component polyurethane system, designed to form a tough rubber membrane impervious to moisture. Type I: For horizontal surfaces Type II: For vertical surfaces. Composition: Polyurethane elastomer. A two-component system, which does not depend on atmosphere moisture to cure. Basic Uses: Once cured, #418 allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. PRODUCT #418 has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. PRODUCT #418 remains flexible from -75° to 175°F. Product #419 Waterproofing Membrane Black Waterproofing Industrial Strength is a black, liquid applied, two-component, high solids, chemical cured, polyurethane coating designed to form a tough rubber membrane impervious to moisture. Composition: Polyurethane elastomer. A two-component system which does not depend on atmospheric moisture to cure. Basic Uses: Once cured, #419 allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. It has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. The #419 waterproof membrane is intended for use on steel, wood, concrete, asphalt, tanks, ponds, roofs, foundations, etc. System #430 Elastomeric Multi-Colored Decking System is a liquid-applied, single-component, moisture-cured, polyurethane deck covering system. For waterproofing patios, sundecks, stairways, balconies, etc. Product #430 can be used on all decks where a skid-resistant, long-lasting, wear-resistant, water-proof surface is required. It may be used on new decks as well as on old concrete decks which are damaged, or cracked. The system is suitable for exterior as well as interior applications in all kinds of climates. The coating retains its elastomeric properties in below freezing weather as well as in very hot climates. Product #440 Light Stable Deck Membrane System #450
Elastomeric Flooring system System #450 Mechanical Room Flooring System - Liquid-applied, single-component, moisture-cured, polyurethane deck covering system. System #450X2 Urethane Decking System double strength System #450HT- High Tensile Strength version of the 450 system for extra heavy duty applications Product #451 Aromatic Polyurethane Coating Product #452 Polyurethane Membrane Standard Product #453 Polyurethane Membrane Slope Grade Product #454 Polyurethane Membrane non-gassing Product #455 Polyurethane Membrane Grading Material Product #456 Urethane Coating Product #457 Polyurethane Membrane 100% Solids Product #458 2Component Urethane Coating Product #462 High Tensile Strength Urethane Deck Membrane Product #466 High Tensile Strength Aliphatic Top Coating Product #469 Elastomeric Membrane Deck Grade System #470 Multi Use Elastomeric System Product #471 Multi Use Base Coat Product #472 Multi Use HT Product #473 Aromatic Urethane Coating for #470 System Product #474 Aliphatic Urethane Coating for #470 System Product #475 Catalyst for #470 System System #480 Elastomeric Deck Product #490 Athletic and Driveway Surface is a one part liquid applied coating with good ultraviolet light resistance. PRODUCT #490 is designed for use on pool decks, tennis courts, asphalt driveways, and concrete surfaces. This product is recommended for foot traffic areas to reduce slipping on commercial and industrial floors. Due to the waterbased formulation of the product, it can be installed in areas where solvent based coatings are objectionable due to their odors and fire hazards. This material can also be applied over damp as well as dry surfaces Flex Epoxy- Epoxy Membrane - a flexible resin used as an epoxy membrane and as a flexible epoxy mortar. It is a two component, 100% solids epoxy used as a base in many Flexible Epoxy Floor and Mortar Systems. It resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. It offers stress-relieving properties for floor slabs that show movement or vibration. It is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers. See also:
Pages Indexed by the WebServer. 2Component Urethane Coating
|
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
|
